Boss Cut Medical 38 Spezial

This high-performance cutting oil is based on hydro crack base oils. It contains optimised, synergistic active agent combinations of EP additives with polar and chemical effects. They prevent the tool and the workpiece from welding in particularly rough places. Controlled sheared-off reaction layers reduce friction and increase tool service lives. This high-performance cutting oil is ISO VG 38 compliant.

Boss Bio Fluid 15

Boss Bio Fluid 15 is a honing and cutting oil based on natural vegetable oils for medium and difficult cutting operations.

Boss Cut BM Spezial 8

This chlorine-free special cutting oil is used mainly for cutting and grinding non-ferrous metals because non-ferrous metals are not discoloured by the special cutting oil. Its special characteristics are its aromatics-free base oils and its skin compatibility. This special cutting oil is ISO VG 8 compliant.

Boss Cut Boa EP range

Boss Cut Boa oils are highly EP alloyed, low mist metalworking oils, suitable for cutting hard-to-cut and tough iron and aluminium materials and highly alloyed case hardening und heat treatable steels. This product range is available to ISO VG 10-46.

Boss Cut Boa HC range

A low mist and low evaporation loss metalworking oil on an HC basis with EP additives. For heavy machining of iron and non-ferrous metals that are medium to very hard to work on. This product range is available to ISO VG 7-22.

Boss Cut Cobra HCS EP range

This high-performance cooling lubricant, developed on the basis of selected HC base oils, is suitable for machining materials that are hard and very hard to cut. This product range is available to ISO VG 7-22.

Boss Cut Cobra MB EP range

Low mist, highly EP-alloyed universal oils for medium-hard to hard-to-cut steels and aluminium alloys. Use subject to viscosity for deep drilling, for tapping and thread cutting, for gearwheel hobbing and for profile grinding. This product range is available to ISO VG 10-46.

Boss Cut Cobra Medic range

This high-performance cutting oil for use in medical technology was tested for cytotoxicity by a quality testing laboratory and and can be used without hesitation in manufacturing implants because it does not react toxically in the human body. This product range is available to ISO VG 10-46.

Boss Cut SL EP range

Non water miscible, chlorine-free, multifunctional cutting oil for a wide range of uses in machining (ISO VG 22-46)

Boss Cut SLP range

Low mist, EP-alloyed, universal metalworking oils in a light colour. For machining easy to moderately easy to work iron and non-ferrous metals. Available to ISO VG 5-46. Boss Cut SLP 46 is also recommended for light forming work.

Boss Cut Standard range

A non water miscible, chlorine-free, multifunctional cutting oil for a wide range of uses in machining. Available to ISO VG 22-46.

Boss Cut Uni range

Special oil for metalworking and hydraulics. The product is based on high-quality additives and the extremely low evaporation loss reduces oil mist generation considerably. It also stands for excellent oxidation stability. Available to ISO VG 15-46.

Boss Cut Viper 1000

High-additive, chlorine-free, EP high-performance cutting oil for tough metalworking on materials that are extremely hard to machine (ISO VG 38).

Boss Fluid Allround range

A non water miscible, chlorine-free cutting oil for a wide range of machining uses (ISO VG 22-46).

Boss Fluid ZHY range

The Boss Fluid ZHY range consists of special fluids for metalworking and hydraulics. The product is based on high-quality additives and has a much higher flash point than convention metalworking oils. The product is chlorine-, zinc-, sulphur- and aromatics-free (ISO VG 15-46).

Boss Cut 100 CF

A partially synthetic special fluid with a special composition, it cannot be compared with any previously known conventional cutting oil. Its special benefits are high cutting speeds, long service lives and precise matches (ISO VG 100).

Boss Cut Cobra MB 404 Spezial

A low mist, very high EP-alloyed metalworking oil for tough machining of ferrous materials that are hard to work on and where special lubrication is required, such as for broaching, tapping and thread forming.

Boss Bio Cut Fluid S range

This vegetable based cooling lubricant is non water miscible and the ecological alternative to conventional metalworking oils. This high-performance fluid was specially designed for work on high-strength materials and is particularly suitable for machining high-strength steels and aluminium and aluminium alloys and non-ferrous metals. Available to ISO VG 10, 22, 32, 46. BOSS Cut Allround range Boss Cut Allround series cutting oils are suitable for drilling, turning, milling and sawing the following materials: GG, GGG, aluminium casting, aluminium materials, non-ferrous metals, steels and materials with a midrange carbon content and alloy grade. Additives lead to an increase in mechanical strength and an improvement in pressure absorption capacity along with less friction on the workpiece, thereby enabling good surfaces and service lives to be achieved. This multifunctional oil is low mist and low evaporation loss, and also chlorine-free. A water-insoluble cutting oil, it helps rinse and dissipate heat well. It is suitable for a wide range of uses, siuch as turning, drilling, milling and sawing. (ISO VG 22,32,46) BOSS Cut Cobra MB 404 Spez. Boss Cut Cobra MB 404 Spezial is a high-performance cutting oil with low mist, low evaporation loss and special additives. It is based on a highly refined, aromatics-free base oil of the highest quality. The product is free of chlorine and heavy metals like lead, zinc and barium. Boss Cut Cobra MB 404 Spezial metalworking oil is used for hard cutting work such as all kinds of broaching operations (broaching and helical broaching), thread cutting, form milling, hobbing and gear hobbing in high-alloy, tough materials.