CNC PROGRAM PLUS EVO II - TIME EVO II
DIAMONDS IN NATURAL STONE - SATELLITES
In the last few years, SAID has used the suffix evo as identifier. The EVO
concept is being widely used in the production of the wheels presented in this
catalog. Raw materials and new generation technologies resulting from
research and development initiated a few years back are found in today’s EVO
PLUS K2 & PLUS EVO II
Lines: Designed and developed for CNC machines (Walter, Anca,
Schneeberger, etc.), these wheels reflect all the characteristics required for
their use. Cutting performance, profile retention, high repetition and
qualitative consistency during the life of the tool, are just some of the
characteristics of these wheels. By now, these second generation wheels are at
the cutting edge of the SAID production.
These wheels are designed to be used for surface and cylindrical grinding,
including centerless. The Floss wheels have innovative mechanical and
physical properties as compared tothe old range of wheels of the same type.
The body of the wheel consists in part of aluminum and in part of resin; the
inner aluminum core adds more structural stability and eliminates problems of
hole ovalization, bending or shrinkage during the operation. The outer resin
band reduces noise and allows for perfect absorption of micro vibrations for a
higher quality finish.
PULSION EVO II - SHARP EVO II - WOOD LINE
PULSION EVO II e WOOD line: Full range of wheels for the manufacture and
resharpening of Tungsten Carbide tipped circular blades and bandsaw blades
with stellite. The wheels are listed for type of machinery. Linea SHARP EVO II: Wheels for the manufacture and resharpening
of blades in HSS, usually utilized on CNC machinery (Schmidt,
Vollmer, Loroch, Businaro, Peruzzi, Stark, etc.).
WHEELS & WHEELS
The catalog lists the most common configurations (FEPA code) of wheels in
diamond and CBN. The wheels are separated by product line according to
their application, or type of machines to be used with.
LIVE Line: Suitable for construction and resharpening of Tungsten Carbide
tool or HSS components.These wheels with resin bonds are utilized on
traditional machines (universal sharpeners, small grinders, etc.) and can be be
used without lubrication.
SPEED Line: Disks for cutting inserts,small bars and cylinders made of
Tungsten Carbide or HSS.
ICE CUT Line: Wheels for universal sharpeners, suitable for tool sharpening
(cutters, bits, burins, etc.) without lubrication.
CUTS Line: Wheels for linear sharpeners, indicated for the manufacturing and
grinding of knives in HSS or Tungsten Carbide.
FAST ONE - FAST FUSION - MASTER EVO
WE GO STRAIGHT TO THE MATTER: as a matter of fact, Fast One and Fast
Fusion, our new products, differ due to the types of tools they can build, yet
they perform the same “PROFILING” process. The grinding wheels of the
FAST ONE line are suited for the profiling of interchangeable knives for
mechanically fastened cutters and carbide knifes on CNC machines
(Schneeberger, Walter, and Tigra). The grinding wheels of the FAST FUSION
line are suited for the profiling of cutters with carbide cutters employing CNC
The bonds used for the wheels of the FAST line are EVO type and use up-to-
the-minute resins with high heat resistance. Normally, a very sharp bond wears
out early, the bond of the FAST line cuts and keeps the wheel profile.
We tested this bond during the roughing process with carbide cutters with 5-
millimeter thickness and we have achieved astonishing results as well with
average-power machines. Furthermore, the FAST wheel also performs very
well even if the oil coolant equipment supplies little pressure.
New NANO-TECHNOLOGIES applied to the processing of tungsten
carbide on CNC machines.
WE WANTED TO ENTER THE CORE
News, the new G2 bond for MICRO-TOOLS construction.
||TECH WHEELS LINE
MANUAL AND SEMIAUTOMATIC MACHINES?
TECH is a new SAID product, through using high temperature resins, SAID has
raised performance limits, hardness, toughness and structural integrity.TECH
will reduce your cost with longer life of the wheel, shorter cycle temes in
production, higter safety levels during processes and higher quality to your
tools.TECH is the new renge of standard whells, specilly designed to be used
on manual and semiautomatic machines with or without cooling lubricant
(Dry and Wet).
Learn more about this SAID product...